Computer Smart Thermostat adjustable digital temperature controller automatic temperature control switch socket

Working voltage: 220VAC/50Hz

Temperature control: 0 -- 99 degrees C

Controlling the temperature difference: 0 -- 99 degrees C

Rated current: 5A (resistive load), the resistive heater below 1000W can be used safely

Dimensions (mm):138 x 98 x 40

Product features:

1 randomly set the start temperature (0 -- 99 degrees C) and stop temperature (0 -- 99 C),

Power supply of electric equipment automatic open and close all

2 temperature display, intuitive readings, simple operation

3 A new temperature sensor magnetic, sensitive reaction, high precision

Product Control Operating Instructions :


Because heating and cooling two requirements , so our thermostats have "hot start" and "cold start" two modes of operation .

1.High temperature start: " When you start temperature" is greater than " stop temperature ", the thermostat is in "hot start" state. For example : Set the "Stop temperature" of 20 ° C, " starting temperature" of 30 ° C, then when the measured temperature is higher than 30 ° C , the machine is turned on, running lights ( green ) light, power outlet at this time . When the measured temperature is less than equal to 20 ° C , the machine off, standby light ( red ) light, power outlet at this time . This start-up mode is mainly used for cooling, such as the open air , exhaust fan and so on.


2. Cold start: " When you start temperature" less than " stop temperature ", the thermostat is in the " cold start" condition. For example : Set the "Stop temperature" of 30 ° C, " starting temperature" of 20 ° C, then when the measured temperature is less than equal to 20 ° C , the machine is turned on, running lights ( green ) light, power outlet at this time . When the measured temperature is higher than 30 ° C, the machine off, standby light ( red ) light, power outlet at this time . This start-up mode is mainly used for heating .

Set Memory function:Thermostat will store your settings , set the time to ensure that power is not lost , without additional settings.



Magnetic probe