EJA430E-JAS5J-81DEJ New Yokogawa EJA430E Gauge Pressure Transmitter

Part Number: EJA430E-JAS5J-81DEJ
Model: EJA430E Gauge Pressure Transmitter
Brand: Yokogawa
Condition: New & Original in Factory Packing
Factory Warranty: 12 Months

Overview
The EJA-E series of transmitters is Yokogawa's most recent evolution of the DPharp family. Released in 2012, it combines the ruggedness and success of the work-horse EJA-E series with the performance of the thoroughbred EJX-A series to deliver the type of product you have come to expect from Yokogawa.

The EJA430E is a traditional-mount gauge pressure transmitter in the series.

EJA430E features include:

Specifications

Model and Suffix Codes
Model EJA430E Gauge pressure transmitter
Output signal -J 4 to 20 mA DC with digital communication (HART 5/HART 7 protocol)(1)
Measurement span (capsule) A 0.03 to 3.5 MPa (4.3 to 500 psi)
Wetted parts material(2) S# Cover flange and process connector: ASTM CF-8M(3)
Capsule: Hastelloy C-276(4) (Diaphragm), F316L SST, 316L SST (Others)
Capsule gasket: Teflon-coated 316L SST
Vent/Drain plug: 316 SST
Process connections *5 without process connector (1/4 NPT female on the cover flanges)
Bolts and nuts material J B7 carbon steel
Installation -8 Horizontal piping and right side high pressure
Amplifier housing 1 Cast aluminum alloy
Electrical connection D M20 female, two electrical connections and a 316 SST blind plug
Integral indicator E Digital indicator with the range setting switch (push button)(5)
Mounting bracket J 316 SST 2-inch pipe mounting, flat type (for horizontal piping)

The ??*?? marks indicate the most typical selection for each specification.
The ??#??marks indicate the construction materials conform to NACE material recommendations per MR0175/ISO 15156. Please refer to the latest standards for details. Selected materials also conform to NACE MR0103.
HART 5 or HART 7 is selectable. Specify upon ordering
Users must consider the characteristics of selected wetted parts material and the influence of process fluids. The use of inappropriate materials can result in the leakage of corrosive process fluids and cause injury to personnel and/or damage to plant facilities. It is also possible that the diaphragm itself can be damaged and that material from the broken diaphragm and the fill fluid can contaminate the user??s process fluids.
Be very careful with highly corrosive process fluids such as hydrochloric acid, sulfuric acid, hydrogen sulfide, sodium hypochlorite, and high-temperature steam (150??C [302??F] or above). Contact Yokogawa for detailed information of the wetted parts material.
Cast version of 316 SST. Equivalent to SCS14A.
Hastelloy C-276 or ASTM N10276.
Not applicable for output signal code F.