STD725-E1AC2AS-1-0-AHT-11S-A-50A0-00-0000 New Honeywell STD725 Differential Pressure Transmitter

Part Number: STD725-E1AC2AS-1-0-AHT-11S-A-50A0-00-0000
Model: STD725 SmartLine Differential Pressure Transmitter
Brand: Honeywell
Condition: New & Original in Factory Packing
Factory Warranty: 12 Months

Features

Ordering Information
Model STD725 Differential Pressure Transmitter
Process Wetted Heads & Diaphragm Materials E Process Head Material:316 Stainless Steel
Diaphragm Material: 316L Stainless Steel
Fill Fluid 1 Silicone Oil 200
Process Connection A None
None (1/4" NPTF female thread Std)
Bolt/Nuts Materials C Carbon Steel
Vent/Drain Type/Location 2 Head Type: Dual Ended
Vent Type: Standard Vent
Location: Side
Vent Material: Matches Head Material(1)
Gasket Materials A Teflon® or PTFE (Glass Filled)
Static Pressure S Standard Static Pressure - 4500 psig (315 bar)
Head/Connect Orientation 1 Standard, High Side Left, Low Side Right(2) / Std Head Orientation
Approvals 0 No Approvals Required
Electronic Housing Material & Connection Type A Material: Polyester Powder Coated Aluminum
Connection: 1/2 NPT
Lighting Protection: None
Output/Protocol H Analog Output: 4-20mA dc
Digital Protocol: HART Protocol
Customer Interface Selections T Indicator: Standard (w/Internal Zero,Span & Config Buttons)
Ext Zero, Span & Config Buttons: Yes
Languages: EN, RU
Application Software 1 Diagnostics: Standard Diagnostics
Output Limit, Failsafe & Write Protect Settings 1 Write Protect: Enabled
Fail Mode: High> 21.0mAdc
High & Low Output Limits(3)
General Configuration S Factory Standard
Accuracy and Calibration A Accuracy: Standard
Calibrated Range: Factory Std
Calibration Qty: Single Calibration
Mounting Bracket 5 Bracket Type: Flat Bracket
Material: Carbon Steel
Customer Tag 0 No customer tag
Unassembled Conduit Plugs & Adapters A0 No Conduit Plugs or Adapters Required
Certifications & Warranty 00 None - No additional options
Factory 0000 Factory Identification

Except Carbon Steel Heads shall use 316SS Vent/Drain, Plugs & Adapters when required
Left side/Right side as viewed from the customer connection perspective
NAMUR Output Limits 3.8 - 20.5mAdc can be configured by the customer or select custom configuration Table Vc