STR735D-21CC1CC0-DDABA400K-A-AHS-11C-A-11A0-F1 New Honeywell STR735D SmartLine Pressure Transmitter with Remote Diaphragm Seals

Part Number: STR735D-21CC1CC0-DDABA400K-A-AHS-11C-A-11A0-F1
Model: STR735D SmartLine Pressure Transmitter with Remote Diaphragm Seals
Manufacturer: Honeywell
Condition: New & Original in Factory Packing
Factory Warranty: 12 Months

Ordering Information
Model STR735D SmartLine Pressure Transmitter with Remote Diaphragm Seals
Number of Seals 2 2 Remote Seals
Primary Fill Fluid (Meter body) 1 Silicone Oil 200
Dual Head DP C 316 SS (bolt-on heads)
Bolts and Nuts for Transmitter Heads C Carbon Steel Bolts and Nuts
Secondary Fill Fluid (capillary & seal)** 1 Silicone Oil 200
Connection of Remote Seal to Meter Body** C Capillary Length: 15 feet (4.5m), SS Armor
Seal Option** 0 None
Flush Flanged Seal with Lower** DDA Diaphragm Diameter: 4.1"
Flange Size:2"
Flange Pressure Rating(1): ANSI 150
Const.: 23
Wetted Material BA Diaphragm: 316L SS
Lower: 316L SS
Non-Wetted Material (upper, upper insert) 4 Upper: 316L SS
Upper Insert: 316L SS
Bolts(2) 0 No Selection
Flushing Connection and Plugs(3) 0 None
Gasket K Klinger® C-4401 (non-asbestos)
Approvals A FM Explosion proof, Intrinsically Safe, Non-incendive, & Dustproof
Electronic Housing Material & Connection Type A Material: Polyester Powder Coated Aluminum
Connection: 1/2 NPT
Lightning Protection: None
Output/ Protocol H Analog Output: 4-20mA dc
Digital Protocol: HART Protocol
Customer Interface Selections S Indicator: Standard (w/internal Zero, Span & Conf Buttons)
Ext Zero, Span & Config Buttons: None
Languages: EN, RU
Application Software 1 Standard Diagnostics
Output Limit, Failsafe & Write Protect Settings 1 Write Protect: Disabled
Fail Mode: High> 21.0mAdc
High & Low Output Limits(4): Honeywell Std (3.8 - 20.8 mAdc)
General Configuration C Custom Configuration (Unit Data Required from customer)
Accuracy and Calibration A Accuracy: Standard
Calibrated Range: Factory Std
Calibration Qty: Single Calibration
Mounting Bracket 1 Bracket Type: Angle Bracket
Material: Carbon Steel
Customer Tag 1 One Wired Stainless Steel Tag (Up to 4 lines 26 char/line)
Unassembled Conduit Plugs & Adapters A0 No Conduit Plugs or Adapters Required
Certifications & Warranty F1 Calibration Test Report & Certificate of Conformance

** Refer to 34-ST-00-128 for additional options, consult factory
Standard facing 125-250 AARH RF (raised face) serrated surface finish.
Bolt material w ill be same as Upper Material. How ever, if Table I bolts/nuts material is NACE , seal bolt material w ill be 304 SS NACE.
Plastic Plugs are TEMPORARY ONLY to protect threads and MUST be REMOVED before installation
NAMUR Output Limits 3.8 - 20.5mAdc can be configured by the customer or select custom configuration Table Vc